Cross-Section Light Scanner
Width-Height-Diameter Measurement Systems

Product Types – Cross-Section Light Scanner – Width Height Diameter Measurement Systems

µMETER-X-TLS System for high-precision measurement of width, height, diameter, gap, position, edge distance and segments Transmitted light based sensor consisting of light emitter and light receiver Sensor types for scan widths from 45 mm to 95 mm Resolution from 1 µm Linearity +/- 10 µm Reproducibility up to < 5µm Distance emitter/receiver from 100 mm to 1900 mm Software packages available for various measurement parameters: Width, height/thickness, edge shape, multiple width, … distance of object edges/surfaces Sensors are cascadable (multiple sensors can be daisy-chained to cover larger measuring ranges)

µMETER-X-VIS/3D Width, Height, Diameter Measurement Systems with 3D signal evaluation: Camera-based sensor for incident and transmitted light consisting of camera and illumination Sensor types for measuring widths from 60 mm to 1250 mm Sensor types for measuring depths from 80 mm to 2000 mm typical measuring accuracy of +/- 0.1 mm Software packages for various measurement parameters available: width, height/thickness, edge shape, multiple width, … distance from object edges/surfaces Sensors are cascadable (several sensors can be linked together to cover higher accuracies or larger measuring ranges)

µMETER-X-VIS/2D Width Height Diameter Measurement Systems with 2D Signal Evaluation: Camera-based sensor for incident and transmitted light consisting of camera and illumination Sensor types for measuring widths from 0.3 mm to 875 mm typical measuring accuracy of +/- 0.5 mm Software packages for various measurement parameters available: width, height/thickness, multiple width, … distance from object edges Sensor is cascadable (several sensors can be linked together to cover higher accuracy or larger measuring ranges)

Cross-Section Light Scanner – Width Height Diameter Measurement Systems
Optical Micrometer / Measuring Cross-Section Light Scanner – in Production Process

Cross-Section Light Scanner – Width Heigth Diameter Measurement Systems
Optical Micrometer / Measuring Cross-Section Light Scanner – In Production

Interface Box for PC Operation µMETER-X-BOX

Interface box for connecting the sensor to a PC or laptop. Allows for easy connection and supply of the sensor. With RS485 output interface and plug-in power supply.

Shielded Cables µMETER-X-K3, K10

Sensor cable for connection to an interface such as µMETER-X-Box or bus module, a controller or a display.

Display of Measurement Values µMETER-X-DISPLAY-BOX	Interface box with measurement value display for connecting the sensor system to a PC or laptop. Box with RS485 output interface and plug-in power supply.
Control/Control Unit µMETER-X-CONTROLLER	Display and Control Unit for the sensors provide the following features: Display of all measurement values Display of sensor status Input of preselection lengths Reset of current length Actuator Contact Sensor parameterization
Sorting Control µMETER-X-SPS	The SPS sorting control for the µMETER-X sensors provide the following features: Operation via Touch-Screen Display of all measurement values Input of nominal lengths Input of low and high tolerance values Output of sorting signals Product data management Measurement data storage

Measurement Tripod µMETER-X-TRI

The µMETER-X sensors are lightweight and therefore very well suited for mobile measurement in conjunction with the ELOVIS tripods (TRI). The TRI tripod consists of: tripod, boom with joint, sensor attachment to the boom with ball head and sensor mounting plate.

PC Software µMETER-X-CMS

The CMS configuration and monitoring software is used for µMETER-X operation, adjustment of setpoint and tolerance values as well as the display and storage of measurement values on a PC, laptop or tablet computer. The CMS software is mainly used for manual measurements.

Profibus-DP, ProfiNet-RT, Ethernet-IP µMETER-XPB, -PN, -EN

Standard bus interface modules with the following output: Measurement Value (in m) , Speed (in m/s), Status Signal (valid/invalid)

Cross-Section Light Scanner for Width Height Diameter Measurement

The material to be measured passes through the measurement area across the conveying direction of the µMETER-X System in longitudinal direction. As soon as the material is located on the same height as the sensor, the corresponding cross-sectional dimension is automatically and continuously determined. To ensure that the measurement can take place with high accuracy, the measurement material has to be as clean and dry as possible. In addition, the measurement object should pass the µMETER-X system as straight as possible. The measurement principle can be described as optical micrometer / measuring cross-section light scanner for measurements in the production cycle. The µVIS-3D system is based on a laser light-section concept in incident light. But the µVIS-3D system can also process transmitted light information. The µVIS-2D system is based on shading of a reflector by the measuring material.

Videos about Cross-Section Light Scanner – Width Height Diameter Measurement Systems
Optical Micrometer / Measuring Cross-Section Light Scanner – in Production Process

Optical Micrometer / Measuring Cross-Section Light Scanner – in

Product Video

Application Video

Downloads for Cross-Section Light Scanner – Width Height Diameter Measurement Systems
Optical Micrometer / Measuring Cross-Section Light Scanner – in Production Process

Product Brochure µMETER-X-V3D -> please contact ELOVIS